📘
Beej's Guide to Network Programming 正體中文版
  • 簡介
  • 原著資訊
  • 譯者誌謝
  • 進階資料
  • 簡體中文版
  • 中文授權
  • 聯絡譯者
  • 1. 導讀
    • 1.1. 本書的讀者
    • 1.2. 平台與編譯器
    • 1.3. 官方網頁與書本
    • 1.4. Solaris/SunOS 程式設計師該注意的事
    • 1.5. Windows 程式設計師該注意的事
    • 1.6. 來信原則
    • 1.7. 鏡射站台(Mirroring)
    • 1.8. 譯者該注意的
    • 1.9. 版權與散佈
  • 2. 何謂 Socket
    • 2.1 兩種 Internet Sockets
    • 2.2 底層漫談與網路理論
  • 3. IP address、結構與資料轉換
    • 3.1. IPv4 與 IPv6
      • 3.1.1. Sub network (子網段)
      • 3.1.2. Port Number(連接埠號碼)
    • 3.2. Byte Order(位元組順序)
    • 3.3. 資料結構
    • 3.4. IP 位址,續集
      • 3.4.1 Private Network
  • 4. 從 IPv4 移植為 IPv6
  • 5. System call 或 Bust
    • 5.1. getaddrinfo()-準備開始!
    • 5.2. socket()-取得 File Descriptor!
    • 5.3. bind()- 我在哪個 port?
    • 5.4. connect(),嘿!你好。
    • 5.5. listen()-有人會呼叫我嗎?
    • 5.6. accept()- 謝謝你 call 3490 port
    • 5.7. send() 與 recv()- 寶貝,我們來聊天!
    • 5.8. sendto() 與 recvfrom()- 來點 DGRAM
    • 5.9. close() 與 shutdown()- 你消失吧!
    • 5.10. getpeername()-你是誰?
    • 5.11. gethostname()-我是誰?
  • 6. Client-Server 基礎
    • 6.1. 簡單的 Stream Server
    • 6.2. 簡單的 Stream Client
    • 6.3. Datagram Sockets
  • 7. 進階技術
    • 7.1. Blocking(阻塞)
    • 7.2. select():同步 I/O 多工
    • 7.3. 不完整傳送的後續處理
    • 7.4. Serialization:如何封裝資料
    • 7.5. 資料封裝
    • 7.6. 廣播封包:Hello World!
  • 8. 常見的問題
  • 9. Man 使用手冊
    • 9.1. accept()
    • 9.2. bind()
    • 9.3. connect()
    • 9.4. close()
    • 9.5. getaddrinfo(), freeaddrinfo(), gai_strerror()
    • 9.6. gethostname()
    • 9.7. gethostbyname(), gethostbyaddr()
    • 9.8. getnameinfo()
    • 9.9. getpeername()
    • 9.10. errno
    • 9.11. fcntl()
    • 9.12. htons(), htonl(), ntohs(), ntohl()
    • 9.13. inet_ntoa(), inet_aton(), inet_addr
    • 9.14. inet_ntop(), inet_pton()
    • 9.15. listen()
    • 9.16. perror(), strerror()
    • 9.17. poll()
    • 9.18. recv(), recvfrom()
    • 9.19. select()
    • 9.20. setsockopt(), getsockopt()
    • 9.21. send(), sendto()
    • 9.22. shutdown()
    • 9.23. socket()
    • 9.24. struct sockaddr and pals
  • 10. 參考資料
    • 10.1. 書籍
    • 10.2. 網站參考資料
    • 10.3. RFC
  • 11. 原著誌謝
Powered by GitBook
On this page
Edit on GitHub

11. 原著誌謝

感謝古往今來幫助過我寫完這份導讀的人。感謝 Ashley 幫我將封面設計做成最棒的程式設計師風格、感謝產出自由(free)軟體與套件的所有人,讓我可以做出這份導讀:GNU、Slackware、vim、Python、Inkscape、Apache FOP、Firefox、Red Hat 與許多其它軟體、最後超級感謝數以千計的你們所寫來的改進建議,以及文字上的鼓勵。

我將這份文件獻給我心目中電腦界的大師及鼓勵我的人:Donald Knuth、Bruce Schneier、W. Richard Stevens 與 The Woz、我的讀者、以及整個自由與開放原始碼軟體社群。

這本書是以 XML 撰寫,使用有安裝 GNU tools 的 Slackware Linux 系統與 vim 編輯器。

封面的"藝術"與圖片是使用 Inkscape 產生的,使用客制化的 Python scripts 將 XML 轉換為 HTML 與 XSL-FO。接著用 Apache FOP 將 XSL-FO 輸出檔轉為 Liberation 字型的 PDF 文件檔,Toolchain 100% 都使用自由與開放原始碼軟體。

以下聲明保留原文:

Unless otherwise mutually agreed by the parties in writing, the author offers the work as-is and makes no representations or warranties of any kind concerning the work, express, implied, statutory or otherwise, including, without limitation, warranties of title, merchantibility, fitness for a particular purpose, noninfringement, or the absence of latent or other defects, accuracy, or the presence of absence of errors, whether or not discoverable.

Except to the extent required by applicable law, in no event will the author be liable to you on any legal theory for any special, incidental, consequential, punitive or exemplary damages arising out of the use of the work, even if the author has been advised of the possibility of such damages.

This document is freely distributable under the terms of the Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License. See the Copyright and Distribution section for details.

Copyright © 2012 Brian "Beej Jorgensen" Hall

Previous10.3. RFC

Last updated 2 years ago